How To Restore Default Settings; Restore Default Settings With The Print Button - Honeywell PC42T User Manual

Printer Problems and Possible Solutions (continued)
Problem
The printer continues to print or
feed when it should stop
printing

How to Restore Default Settings

Restore Default Settings with the Print Button

PC42t Desktop Printer User Guide
Possible Solution
Check to see if a stuck label is blocking the label gap
sensor. Open the top cover, remove the label, and clean the
printhead. For help, see
page 35.
If you need to restore factory defaults at any time, you can use:
• the Print button.
• the printer web page.
• PrintSet.
The easiest way to reset the printer to the factory default settings is with
the Print button.
1 Turn off the printer.
2 Press in on the cover latches on both sides of the printer and open
the cover.
3 Press in on the top of both locking tabs to open the print and ribbon
mechanism.
4 Turn the printer on.
5 When the status LED starts blinking green, press and hold the Print
button until the status LED turns off.
6 Make sure the media is loaded correctly.
7 Close the print and ribbon mechanism.
8 Close the cover.
Chapter 3 — Troubleshoot and Maintain the Printer
"Clean the Printhead" on
33