Ethernet Settings; Media Settings - Honeywell PC42T User Manual

Serial Port Settings (continued)
Setting
New Line
Character

Ethernet Settings

Ethernet Settings
Setting Description
IP Assignment Specifies how the printer obtains an IP address.
Method
IP Address Specifies the unique network-level address that is
assigned to each device in a TCP/IP network (IPv4).
Subnet Mask Specifies a number that defines the range of IP
addresses that can be used in a TCP/IP network.
Default Router Specifies the IP address of a router that is used when a
device sends a packet to another subnet or to an
unknown destination.
DHCP Response Specifies if the printer receives DHCP responses by
broadcast or unicast.

Media Settings

PC42t Desktop Printer User Guide
Description
Defines the characters that the printer echoes to the
host to indicate that it has moved to a new line.
This section describes the Ethernet IPv4 settings. To view these
settings:
• From the printer web page, click the Configure tab >
Communications > Ethernet.
This section describes media settings for the printer. To view these
settings:
• From the printer web page, click the Configure tab > Printing >
Media.
Note: If the printer is not connected to a network, you need to use
PrintSet 5 through a USB connection to configure the media settings.
Appendix B — Default Settings
Default
CR/LF
Default
DHCP
0.0.0.0
0.0.0.0
0.0.0.0
Br
49