Table of Contents
Advertisement
Chapter 6 — Maintain the Printer
5 Rotate the platen roller latch clockwise to detach it from the printer
6 Insert the new platen roller into the printer and turn the latch
7 Reload media and turn the printhead lift lever clockwise to lower it.
8 Close the media cover, reconnect power, and turn on the printer.
How to Adjust the Printer
You may need to adjust the printer to improve performance or
accommodate your method of printing. You can make these
adjustments:
•
•
•
•
68
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
and pull the platen roller away from the printer.
counterclockwise to secure it.
Ribbon tension
Printhead balance
Printhead pressure
Label gap and black mark sensor
V10 CONSUMIBLES S.L.
PM42 Industrial Label Printer User Manual
Advertisement
Table of Contents
