6
Wireless Network Connections
Managing Wireless Connections
The Thor VM3 has an 802.11 a/b/g/n WLAN radio and an optional WWAN radio.
• The WLAN radio is configured using the
• The WWAN radio is configured using the
• The VM3 Connection Manager also provides configuration options for roaming between WLAN and WWAN connections.
WLAN Wireless Configuration Utility (WCU)
The 802.11 wireless client device is a Qualcomm Atheros AR950 802.11 a/b/g/n WLAN adapter. This wireless radio is config-
ured by the Wireless Configuration Utility (WCU).
Dynamic vs. Fixed IP Address
When changing between dynamic and fixed IP address (Select
> Network and Sharing Center > Change Adapter Settings, right-click on desired adapter and select Properties > Inter-
net Protocol Version 4 (TCP/IPv4) > Properties) be sure to reboot the Thor VM3 after changing the IP address type.
Important Notes
It is important that all dates are correct on the Thor VM3 and host computers when using any type of certificate. Cer-
tificates are date sensitive and if the date is not correct authentication will fail.
When using the 802.11 radio, the U-NII 1 band is the preferred band for indoor operation. For regulatory domains in
which the U-NII 3 band is allowed, the following channels are supported: 149, 153, 157 and 161. The AP must be
configured accordingly.
Using the Wireless Configuration Utility
Note: When finished making changes the device should be restarted afterwards.
(Start) > All Apps > Honeywell > Honeywell (version ID) > WCU or
WCU Icon on Desktop
When using any profile that requires the user to enter credentials (user name, password), the user should enter those
credentials when the window pops up. If the credentials are not entered then, the credentials window may be hidden
by other windows.
WLAN Wireless Configuration Utility (WCU)
VM3 WWAN Connection Manager
Tasks
(page 6-1).
(page 6-36).
(Start) > All Apps > Windows System > Control Panel
Status
Profile List
6 - 1