Honeywell Thor VM3 Manual page 118

Ignition Control/Ignition On
Select either the Ignition Control/Ignition On or the Ignition Control/Ignition Off power scheme/plan when ignition
control of the Thor VM3 power on process is desired.
The Thor VM3 aromatically switches between the Ignition Control/Ignition On or the Ignition Control/Ignition Off
power schemes/plans depending on the state of the vehicle ignition input.
The following default timeouts are used in the Ignition Control/Ignition On power scheme./plan
Setting
Dim the display
Turn of the display
Put the computer to sleep
Hibernate after
The ignition input wire must be connected. If the user selects this power scheme/plan but the ignition is Off, the
Ignition Control/Ignition Off scheme/plan is used instead.
5 - 20
Plugged In
(AC or DC Power)
Never
30 minutes
Never (see note)
300 minutes
On Battery
(UPS Power)
Never
1 minute
Never (see note)
20 minutes