Honeywell Thor VM3 Manual page 16

Vehicle-mount computer
Hide thumbs Also See for Thor VM3:
Table of Contents

Advertisement

There are three type of docks available for the Thor VM3. Features of the docks are described below:
VM1D Standard Dock
SKUs
VM1001VMCRADLE (with RAM
ball)
VM1002VMCRADLE
VM1003VMCRADLE
Power
Direct, DC/DC Adapter, AC/DC
Adapter
Connection
Serial
COM1 and COM2
Ports
USB Ports
USB port provides host connec-
tion via an adapter cable. This
port also supports Honeywell
external keyboards.
Ethernet
N/A
CANbus
CANbus connection via an adapter
cable
Audio
Headset connection via an adapter
cable
Screen
Supported via COM1 and COM2
connectors.
Blanking
Ignition
Supported
Control
Note: For the VX4D Enhanced DOCK: COM1 is used for screen blanking (via the power cable connector) and is unavailable
when the screen blanking box is attached. When a screen blanking box is attached, any external serial device such as a
scanner, must be connected to the COM2 port on the connection.dock. If a screen blanking box is not connected via the
power cable, the COM1 port on the dock is available for a serial device.
2 - 4
VM3D Enhanced Dock
VM3001VMCRADLE
Direct, DC/DC Adapter, AC/DC
Adapter
COM1 and COM2
USB1 port provides host connec-
tion via an adapter cable. This
port also supports Honeywell
external keyboards.
USB2 port provides two USB host
ports via an adapter cable.
Direct USB host connection on top
of dock.
RJ-45 Ethernet connection on top of
dock.
CANbus connection via an adapter
cable
Headset connection via an adapter
cable
Supported via COM1 and COM2
connectors.
Supported
VMXD Enhanced Dock
(for Thor VM3 replacing Thor
VX8 and Thor VX9
VMX004VMCRADLE
Designed to connect to existing Thor
VX8 or Thor VX9 power cable only
COM1 and COM2
(see note below)
USB1 port provides host connec-
tion via an adapter cable. This
port also supports Honeywell
external keyboards.
USB2 port provides two USB host
ports via an adapter cable.
Direct USB host connection on top
of dock.
RJ-45 Ethernet connection on top of
dock.
CANbus connection via an adapter
cable
Headset connection via an adapter
cable
Supported via power cable connec-
tor. (see note below)
Not supported

Advertisement

Table of Contents
loading

Table of Contents