External Keypad - Honeywell Thor VM3 Manual

External Keypad

(Start) > All Apps > Windows System > Control Panel > External Keypad (Large or Small Icon View)
This function remaps the programmable keys (PF and Yellow + PF) in the external (21-key numeric) USB keyboard. To
remap the P1-P7 keys integrated into the front panel of the Thor VM3, see
The External Keypad panel can be used to perform the following functions:
• Remap a Key to a Single Key
• Remap a Key to a Unicode Value
• Remap a Key to a Key Sequence
• Remap a Key to a Sequence of Unicode Values
• Remap a Key to Launch an Application
• Remap a Key to Run a Command
Remap a Key to a Single Key
1. Select the modifier key from the Modifier Mode options.
2. The key to be remapped is the programmable function (PF) key on the numeric keyboard.
3. Select the value for the remapped key from the pull-down list.
4. Click OK to save the result and close the control panel.
Remap a Key to a Unicode Value
1. Select the modifier key from the Modifier Mode options.
2. The key to be remapped is the programmable function (PF) key on the numeric keyboard.
3. Select Unicode from the pull-down list.
4. There are two Unicode text boxes located on the lower part of this tab. Enter the Unicode value in the text box
to the right of ALT + and the Unicode character is displayed in the box to the right of =.
5. Click OK to save the result and close the control panel.
5 - 14
(page 5-14)
(page 5-14)
(page 5-15)
(page 5-15)
(page 5-15)
(page 5-16)
Programmable Key (page 5-29).