Honeywell Thor VM3 Manual page 123
Vehicle-mount computer
Hide thumbs
Also See for Thor VM3:
- User manual (378 pages) ,
- Quick start manual (15 pages) ,
- User manual (100 pages)
Table of Contents
Advertisement
Auto-On Behavior
When the Auto-On power scheme/plan is selected and external power is present the Thor VM3 behaves as
described below. If external power is not present, refer to the
Thor VM3 is Off
Conditions
The Thor VM3 is Off and gets external power, such as
• Thor VM3 is installed on a powered Smart Dock with the dock power switch On
• Thor VM3 is already mounted to a dock and external power is applied to the dock
• Thor VM3 is already mounted to a dock and the dock power switch is turned On
Result
The Thor VM3 boots. Once booted the Thor VM3 follows the Auto-On power scheme/plan with timers
reset after the boot completes.
Thor VM3 is On
Conditions
The Thor VM3 is On and gets external power, such as
• Thor VM3 is installed on a powered Smart Dock with the dock power switch On
• Thor VM3 is already mounted to a dock and external power is applied to the dock
• Thor VM3 is already mounted to a dock and the dock power switch is turned On
Result
The Thor VM3 continues to run and follows Auto-On power scheme/plan with timers reset at the time
power was connected.
UPS
(page 5-26) section for Thor VM3 behavior.
5 - 25
Advertisement
Table of Contents
