Honeywell Thor VM3 Manual page 153

Profile List
All profiles that have been created are listed in this section. Profiles can be configured for auto connect or manual con-
nect and are subdivided by connection type in this list.
From the profile list, an admin can:
• Organize - Open or rename a profile
• New - Create a new profile
• Delete - Delete an existing profile
• Activate - Make an inactive profile the active profile. The inactive profile may be either a manual or an auto profile
not currently in use.
• Deactivate - When the current active profile is selected, this option deactivates that profile. If there is an inactive
auto profile, that profile may become active.
• Up - If there are multiple profiles, the Up feature moves the selected profile up the list. This feature is available for
both the Auto and Manual profiles.
• Down - If there are multiple profiles, the Down feature moves the selected profile down the list. This feature is
available for both the Auto and Manual profiles.
Similar features are also available by right-clicking on a profile name:
• New - Create a new profile.
• Open - Open the selected profile to view or edit properties.
• Activate - Make an inactive profile the active profile. The inactive profile may be either a manual or an auto profile
not currently in use.
• Deactivate - When the current active profile is selected, this option deactivates that profile. If there is an inactive
auto profile, that profile may become active.
• Disconnect - If the selected profile is connected, this option disconnects the profile.
• Rename - Use to assign a new name to the selected profile.
• Up - If there are multiple profiles, the Up feature moves the selected profile up the list. This feature is available for
both the Auto and Manual profiles.
• Down - If there are multiple profiles, the Down feature moves the selected profile down the list. This feature is
available for both the Auto and Manual profiles.
Admin Login
All users can select from existing profiles and use the browse feature to view nearby networks.
It is necessary to log in to create or edit profiles, turn the radio off or on and to adjust the roaming parameters.
Admin is not Admin is
logged in logged in
The appearance of the icon indicates if the admin is logged in or not.
To log in:
1. Tap the Admin Login icon.
2. Enter the password. The default password is Honeywell.
The radio has successfully connected to the network:
• If security is enabled, the authentication process has been
completed.
• The SSID of the network is displayed below the access point icon.
• The signal strength is also displayed below the access point icon.
6 - 3