Honeywell Thor VM3 Manual page 120

Ignition Control/Ignition Off
Select either the Ignition Control/Ignition On or the Ignition Control/Ignition Off power scheme/plan when ignition
control of the Thor VM3 power on process is desired.
The Thor VM3 automatically switches between the Ignition Control/Ignition On or the Ignition Control/Ignition Off
power schemes/plans depending on the state of the vehicle ignition input. Default timeouts are shorter in this
scheme to conserve the vehicle battery charge.
The following default timeouts are used in the Ignition Control/Ignition Off power scheme/plan.
Setting
Dim the display
Turn of the display
Put the computer to sleep
Hibernate after
The ignition input wire must be connected. If the user selects this power scheme/plan but the ignition is On, the
Ignition Control/Ignition On scheme/plan is used instead.
5 - 22
Plugged In
(AC or DC Power)
Never
1 minute
Never (see note)
60 minutes
On Battery
(UPS Power)
Never
1 minute
Never (see note)
20 minutes