Bluetooth Scanning - Honeywell Thor VM3 Manual

Bluetooth Scanning

(Start) > All Apps > Windows System > Control Panel > Bluetooth Scanning (Large or Small Icon View)
There are several options to add a scanner:
• Quick Connect (page 5-6) - Displays a bar code to be scanned by the desired Bluetooth scanner. The bar code displayed
on screen only works for certain Bluetooth scanners. See
• Search (page 5-7) - Initiates a search (discovery) of Bluetooth scanners within range. See
• Manual (page 5-8) - Prompts for entry of the Bluetooth scanner's MAC address. See
• Previous Devices - Displays a list of devices previously discovered Bluetooth scanners.
Some scanners are not supported via Bluetooth Scanning. To connect one of these scanners, see
(page 5-8).
If a scanner does not connect, see
Quick Connect
There are two different bar codes printed on decals on the side of the Thor VM3.
Note: The bar codes below are samples. Do not scan these to connect a Bluetooth scanner. Scan the bar code on
your device.
LnkB00078006111AAA
LnkB Bar Code Sample
Using Quick Connect with Preprinted Labels
Scan the applicable bar code as indicated below:
Use the LnkB bar code on either side of the Thor VM3 to connect the following scanners:
• Honeywell/LXE 8650 family of Bluetooth ring scanners
• Honeywell Granit 1911i Bluetooth scanner
• Honeywell Granit 1981i Bluetooth scanner
• LXE 88x0 family of Bluetooth scanners
Use the bar code Quick Connect bar code on either side of the Thor VM3 to connect the following scanners:
• Intermec SF51 Bluetooth scanner
• Intermec SF61 Bluetooth scanner
• Intermec SR61 Bluetooth scanner
5 - 6
Quick Connect
Troubleshooting (page 5-8) for help.
(page 5-6) for details and supported scanners.
Bluetooth Quick Connect 007806111AAA
Quick Connect Bar Code Sample
Search (page 5-7) for details
Manual (page 5-8) for details.
Adding Other Scanners