Honeywell Thor VM3 Manual page 163

LEAP
To configure for Cisco LEAP:
1. Set Security Type to WPA2-Enterprise or CCKM.
2. Set Encryption type to AES.
3. Tap the Settings button.
4. Select the desired credentials method of providing credentials. Prompt automatically for username and password
is recommended.
5. If saved username and password is selected, enter the credentials now.
6. Tap OK to close all open windows.
7. From the profile listing, make sure the desired profile is active.
8. If prompt for username and password option was selected, enter the credentials when prompted.
Note: If the credentials are not entered when to window first pops up, the credentials window can become hidden
behind other windows.
9. Verify the connection using Status (page 6-2).
6 - 13