Keyboard Leds; Display; Touch Screen - Honeywell Thor VM3 Manual

Keyboard LEDs

The keyboard LEDs are located near the specified key.
Blue LED
Solid Blue
Off
Orange LED
LED Behavior
Solid Orange
Off
Programmable LED
The Programmable LED is available for user applications. The LED defaults to Off unless activated by user applica-
tion.

Display

The display is a thin-film transistor display capable of supporting SXGA graphics modes. Display size is 1024x768 pixels. The
display covering is designed to resist stains. The display supports screen blanking to eliminate driver distraction when the vehi-
cle is in motion.

Touch Screen

The touch screen is a Resistive Panel with a scratch resistant finish that can detect touches by a stylus, and translate them
into computer commands. In effect, it simulates a computer mouse. Only Delrin or plastic styluses should be used. A right
mouse click is simulated by touching and holding the screen for the appropriate time interval.
The Thor VM3 has two touch screen options:
• The standard touch screen is a Resistive Panel with a scratch resistant finish that uses a standard plastic stylus.
• The optional touch screen is a multitouch panel with Projected Capacitance (PCAP) touch for either a finger or conductive
stylus with a hardened glass overlay.
The touch screen detects touches by a stylus, and translates them into computer commands. In effect, it simulates a com-
puter mouse. Only the proper styluses should be used. A right mouse click is simulated by touching and holding the
screen for the appropriate time interval.
When a dialog box is too large for the display, tap and drag the dialog box up or down or from side to side to view the
remainder of the dialog box.
Always use the point of the stylus for tapping or making strokes on the display. Never use an actual pen, pencil, sharp or
abrasive object to write on the touch screen.
An extra or replacement stylus may be ordered.
• Indicates the Blue modifier key is active
• Pressing the Blue key a second time exits this modifier mode and turns off the LED
• Pressing the Orange key exits the Blue mode and turns off the Blue LED
• If no key other key is pressed within five seconds, the Blue key times out and turns off the
LED
• When Blue mode is active, keys P1 and P2 provide volume adjustment and keys P5 and
P6 provide brightness adjustment functions
Blue mode is not invoked
Status
• Indicates the Orange modifier key is active. Orange mode is invoked for the next keypress
only
• Pressing the Orange key a second time exits this modifier mode and turns off the LED
• Pressing the Blue key exits the Orange mode and turns off the Orange LED
Orange mode is not invoked.
3 - 17