Honeywell Thor VM3 Manual page 109

Tethered Scanner (COM1)
Tethered Scanner (COM2)
Note: By default, COM1 and COM2 are enabled as scanner ports. To use the COM port for another use (such as
screen blanking), set the Enable Scanner Port to Off for the desired port.
Note: Symbology configuration is supported on Intermec scanners. For all other scanners use the bar codes
provided in the scanner manuals to program the symbologies.
Note: Do not select ASCII as the scanner model for an Intermec scanner or the ability to configure the symbology
settings with Enterprise Settings is lost.
Bluetooth Scanners
BT-Configure on Connect
Bluetooth
Power
Discoverable
Connectable
Class of Device
IBT
Radio
Device Address
Applications
Launcher
Enterprise Browser
• Enable scanner port (On by default, see note below)
• Symbologies
• Symbology Options
• Scanner Settings
• Scanner port Settings
• Decode Security
• Enable scanner port (On by default, see note below)
• Symbologies
• Symbology Options
• Scanner Settings
• Scanner port Settings
• Decode Security
Auto-configure on connect:
• Overwrite with computer settings
• Keep scanner settings
Parameters
• Off
• On (default)
• Disable (default)
• Enable
• Disable
• Enable (default)
Hardware information (no user entry)
Hardware information (no user entry)
Hardware information (no user entry)
Hardware information (no user entry)
Parameters
• Program Version
• Application Launch Buttons
» Caption text Color
» Application Button 1 - 21
• Background Image
• Single Application Auto Start
• Restricted File Browser
• Default Password
• Advanced Options
Program Version
Browser Engine
General
Menu Options
Security
Privacy
Appearance
Menu and Toolbar Actions
5 - 11