Ssd State Monitor; Tablet Pc Settings (Touch Screen Calibration); User Accounts - Honeywell Thor VM3 Manual

SSD State Monitor

(Start) > All Apps > Windows System > Control Panel > SSD Monitor (Large or Small Icon View)
Use this option to view statistics for the SSD drive(s) installed.
For each attribute, the current, worst, threshold and data values are displayed. The status is also displayed.
If there is more than one SSD installed, there is a tab for each drive.
Tap the Settings button to set the frequency the automatically update data for the SSD drive(s). The default is 1 hour.

Tablet PC Settings (Touch Screen Calibration)

(Start) > All Apps > Windows System > Control Panel > Tablet PC Settings (Large or Small Icon View)
The Thor VM3 uses the HIDeGalaxTouch touch screen driver. The Calibrate... button on this control panel is not used.
Instead use the HIDeGalaxTouch utility, see
screen. The PCAP touch screen is calibrated at the factory and does not use the calibration utility.

User Accounts

Note: The following applies to a Thor VM3 that is not part of a domain. When the Thor VM3 is part of a domain, the user
is prompted for credentials at Windows startup or log on.
The Thor VM3 is pre-configured with an administrator account named Administrator. By default, the Thor VM3 automati-
cally logs onto the Administrator account at Windows startup.
If the user assigns a password to the Administrator account:
• The password is stored and used when the Thor VM3 logs onto the Administrator account at Windows startup. The user
is not prompted to enter a password.
• If the user logs off, the password must be manually entered to log back onto the Thor VM3.
• At the logon prompt, the user could specify a different user account (and password, if necessary) to log on, assuming the
account has been added to the Thor VM3.
• When the Thor VM3 is restarted, the Administrator account automatically becomes the active user account, regardless
of the active account before the restart.
Touch Screen Calibration (page 5-42) for information on calibrating the touch
5 - 39