Honeywell Thor VM3 Manual page 35

The keyboard keys are backlit. The keyboard backlight is manually controlled using the backlight key in the upper
right hand corner of the keyboard. Pressing the backlight key cycles the keyboard backlight through the levels of
backlight intensity: Off, Low intensity, Medium intensity, Maximum intensity, Off, etc. When the Thor VM3 is pow-
ered on, the keyboard backlight defaults to Off.
Since the keyboard is a USB device, by default the external keyboard backlight is turned off when the Thor VM3
enters Suspend. This behavior can be changed by enabling USB power in Suspend on the Misc tab of the
Options (page 5-43) control panel.
Since the keyboard is a USB device, by default the external keyboard backlight is turned off when the Thor VM3
enters Standby/Sleep. This behavior can be changed by enabling USB power in Standby/Sleep on the
(page 5-17) control panel.
The PF key can be programmed using the
The PF key can be programmed using the
External Keypad (page 5-14) control panel.
Keyboard Remapper (page 5-35) control panel.
Options
3 - 11