Method For Starting The System Monitor - Mitsubishi Electric Got 1000 Training Manual

6.4.2

Method for starting the system monitor

Simultaneous 2-point touch
2)
3)
(4) Hardware and OS required for system monitor function
The following hardware and OS are required to use the system monitor.
Required option
function board
—
Utility call keys
(Next page)
Extended function /
option OS
System monitor
(extended function)
1) Touch the upper left and upper right corners
on monitor screen of the GOT main unit at the
same time.
2) When the utility is displayed, touch [Main
Menu] - [Debug & self check].
3) Touch [Debug].
6 - 18
Capacity for user area
(calculated value for data
capacity)
746k bytes