Mitsubishi Electric Got 1000 Training Manual page 100

(2) Bit switch settings
2)
4)
1) Click the Dev... button in [Switch Action].
1)
2) As the [Device] dialog box appears, set the
3)
device to "M10".
3) After setting is completed, click the OK
button.
4) Select [Action].
[Action] determines how the bit device will
behave when touched.
"Set": turns ON when touched
"Reset": turns OFF when touched
"Alternate": toggles ON/OFF when touched
"Momentary":
Select "Set" here.
5 - 28
turns on while
touched
(turns OFF when released)
being