Mitsubishi Electric Got 1000 Training Manual page 53

Remarks
• Screen switching device settings
With the screen switching device, refer to the following to set the devices to be
used.
1) GOT internal device (GD)
It is recommended to use this device only for switching the screen with the
touch switch (screen switching switch).
Screen switching cannot be controlled by the PLC CPU.
With the screen switching device, the internal device (GD100) is set by
default.
2) PLC CPU device (D,W, etc.)
It is recommended to use this device to control screen switching from the
PLC CPU.
Screen switching can also be performed by the touch switch (screen switching
switch).
4 - 13