Lamp Display Settings - Mitsubishi Electric Got 1000 Training Manual

5.4 Lamp display settings

2)
This function is used to turn on/off the lamp depending on the bit device condition
(on/off) or the value of word device.
In this section, create a lamp display which turns on when Y7A is ON.
(1) Reading a lamp figure from the library
Read a lamp figure previously prepared in GT Designer2 from the library.
(Next page)
Lamp display
Y7A: Lamp is lit when it is turned ON.
1) Click the [Library] tab in the workspace.
2) Click + of [crystal] in the tree structure to open
the folder, and double-click the "4 Crystal
lamp (4)".
1)
5 - 25
Screen Screen
No. 1 No. 2
Window
No. 1