Chapter 6 About Debug 6- 1 To; Extended Function And Option Os - Mitsubishi Electric Got 1000 Training Manual

Chapter 6 About Debug

6.1 Extended Function and Option OS

Function Name
System monitor
Bar code
Multi-color display
Recipe
Advanced recipe
Standard font (Chinese: Simplified,
Traditional)
(Simplified Chinese [GB] Mincho)
(Traditional Chinese [BIG5] Gothic)
Maintenance time notification
MELSEC-Q/QnA ladder monitor
MELSEC-A ladder monitor
MELSEC-FX ladder monitor
Gateway (Server, Client)
Gateway (Mail)
Gateway (FTP server)
Network monitor function
This chapter describes the debug function used for troubleshooting and
maintenance of the PLC system.
The Extended function OS or the Option OS is the function enabled by installing the
option function board, or the extended function OS/option OS in the GOT.
(1) Difference between Extended function OS and Option OS
Functions available by installing an Extended function OS
Extended
function OS
(An option function board is not required.)
Functions available by mounting an option function board or
Option OS installing an option OS (Some option functions do not require an
option OS.)
(2) List of extended/option functions
Functions to monitor or change the PLC CPU devices
Functions to store the data read with a bar code reader connected to
the GOT into the PLC in the ASCII data
Functions capable of displaying 65536 colors
Functions to store device values in the GOT, and use the data from
the GOT to read or write to devices such as a PLC
Functions to display Chinese fonts in the GOT
Functions to automatically count the energization time in the
backlight, and notify the maintenance time in two stages
Functions capable of monitoring sequence programs and searching
devices and defects
Functions that a single PC or GOT collects and monitors the data of
PLC which is monitored by multiple GOTs.
Function to monitor the network status of MELSECNET/H,
MELSECNET/10, etc.
Description
6 - 1