Mitsubishi Electric Got 1000 Training Manual page 103

(4) Creating other bit switches
Create a new switch by copying and pasting the switch created in step 2.
Copy and paste a switch as described below.
2)
Point
For the copied touch switch, note that the size of touch switch figure and the
effective area (where reactive to touch operation) of touch switch may not
exactly overlap.
In such cases, adjust the effective area of touch switch as instructed below.
1) Right-click the mouse and select [Enable Two Tracker Mode] in menu.
2) Change the size of the touch switch effective area so that it overlaps the
touch switch figure size.
The touch switch effective area can be changed in 16 dot unit.
1)
2)
3)
3)
4)
5)
Effective area for touch switch
Touch switch figure size
5 - 31
Click the source switch and select it.
Click on the toolbar (Main).
Click on the toolbar (Main).
As a frame for display range appears, move it
to the desired position.
Click the mouse button to paste the cut
switch.