4.2.2
Communication Settings
Point
Settings described in this section are not required when settings are made on the
new project wizard (Section 4.2.1).
The GOT and PLC CPU communication settings are performed.
When the GOT is used first, set the channel No. of the communication interface and
the communication driver, and download the settings to the GOT.
This section explains about using a bus connection between the GOT and CPU.
Double-click.
(Next page)
1)
Double-click [Common Settings] → [System
Environment] menu in the project workspace.
2)
When
the
appears,
Settings].
4 - 7
System
Environment
double-click
[Communication
screen