Mitsubishi Electric Got 1000 Training Manual page 111

(3) Settings on object screen
Adjust the size of object frame so that all the comments are displayed.
Create a frame for the comments.
Point
• The display condition for set comments can be displayed switching between ON
and OFF by pressing the "ON/OFF of object function" button on the toolbar
(Display setting).
• Adjust the size of display area when the comments vary in length depending on
its ON/OFF condition as follows:
(Example) In case of ON, [Alarm: The water level is at upper limit].
In case of OFF, [lower limit].
Adjust the size of display area to be able to display a longer comment by
switching comment displays with the "ON/OFF of object function" button
of toolbar (Display setting).
1) As the cursor changes to a re-sizing cursor
when it is moved over to the handle, click the
left mouse button and drag it to the desired
size for displaying.
2) When the display area is determined, release
the left mouse button.
3) Create a frame for comments using text.
This completes the settings of the comment
display by a bit device.
5 - 39