Mitsubishi Electric Got 1000 Training Manual page 194

Screen switching
This switches between the GOT base screen and window screen.
To switch between the screens, the word device for base and for window screen switching
must be set.
In addition to the PLC word devices, GOT dedicated devices (GD) in the GOT can also be
used.
Script function
The script functions are functions designed to control the GOT display with the GOT's original
programs.
Controlling the GOT display with the GOT side script drastically reduces the load on the
system side (e.g. PLC CPU, microcomputer) display.
Self check
This is a function with which the GOT (CPU) detects its own errors.
This function tests the GOT hardware, communications, memory, display, etc.
Serial communication
This is a method of communication that sends the data per bit along one line as the time goes
by.
Serial communication unit
The module that provides the functions for connecting with the PLC and a computer (GOT or
personal computer) and for reading/writing PLC devices.
When connecting the GOT1000, a communications module for the GOT is required.
Set
To switch ON the bit device or the specified bit of the word device of the PLC
The signal switched ON remains ON until it is reset.
Setting value
This is the setting value for a PLC timer (T) or counter (C) and is the numeric value used as
the goal.
In sequence programs, setting values can be set with fixed values or specified indirectly.
With a GOT, setting values can be monitored and changed from the system monitor screen.
Shortcut keys
Shortcut keys are keys or combinations of keys that allow operations without opening the
menu.
Shortcut keys operate combining alphanumeric keys with
Special (D)/(SD)
These are registers with determined applications in the PLC.
A variety of information can be viewed, including PLC CPU information and MELSECNET
information.
The QCPU and QnACPU have dedicated SD devices.
With the ACPU, these are D9000- .
Appendix 40
key or key.
ALT
Ctrl