6.3.2
Operation check (1)
Perform the following operation checks for screen No.3 created in section 6.2.
(1) Test
Perform the following tests in screen No. 3.
Test object
Item
1)
Touch operation
Screen state
Screen No. 3 is not working properly.
A cause of the error will be determined using the ladder monitor.
Touch Ready, and then touch Operation/Stop.
(Under normal conditions)
The Operating lamp turns ON, and the operating time
starts counting.
(Current operations)
The Operating lamp does not turn ON, and the operating
time does not start counting.
6 - 9
Operation
↓