Mitsubishi Electric Got 1000 Training Manual page 180

Appendix 4 Boot OS installation
6)
This section describes the procedures for installing the Boot OS in the GOT.
Point
(1) Boot OS is installed in the GOT at factory shipment so installation is not
usually necessary.
However, if functions not supported by the Boot OS version are used in the
GOT (such as the version upgrade function of GT Designer2, etc.), Boot OS
must be upgraded.
To return the GOT to factory shipment state, install Boot OS to initialize it.
(2) When Boot OS is installed, the currently installed OS and Project data are
automatically deleted.
If Project data backup is necessary, upload it to a PC or memory card (CF
card) before installing Boot OS.
1) Click on the [Communication] - [To/From
GOT...] menu.
2) When the dialog box appears, click the [Boot
OS Install → GOT] tab.
3) Select the GOT type in which the Boot OS will
be installed.
4) Click the Install button.
6) When the Yes button is clicked, Boot OS
installation is executed.
7) After Boot OS installation is completed, click
the Close button to close the dialog box.
Appendix 26