Thin Provisioning Pool Status; Component Status; B.5 Component Status - Fujitsu Eternus web GUI User Manual

For eternus dx90 s2; eternus dx80 s2; eternus dx410 s2; eternus dx440 s2
Table of Contents

Advertisement

B.4

Thin Provisioning Pool Status

Thin Provisioning Pool (TPP) status is displayed with an icon and the status name. The TPP sta-
tus is described below.
Available
Maintenance
Readying
Partially Readying
Exposed
Blockade
Broken
B.5

Component Status

The status for the components is displayed with an icon. The component status is described
below.
Status
The TPP is operating normally.
Forcible recovery of the TPP is being performed.
All the physical area in the TPP is not formatted.
Some parts of the physical area in the TPP is not formatted.
The TPP is available.
The "Exposed" status of the TPP is displayed not only when the
RAID group that configures the TPP has lost redundancy and is in
"Exposed" status, but also when the RAID group maintains redun-
dancy in "Spare in Use" status. The "Exposed" status of TPP indi-
cates that the RAID group in the TPP is not in normal status because
of any causes such as the disk failure.
The TPP is blocked.
The TPP is broken.
Status
The component is operating normally.
Or the components are already installed, but some of them are not
being used.
"
" may also be displayed.
The component is under maintenance.
The component requires preventive maintenance.
An error has occurred in the component.
615
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
Description
Description
P2X0-1090-02ENZ0

Advertisement

Table of Contents
loading

Table of Contents