Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
(2)
Manually specify the SAS address of the host to be added, and click the [OK] button.
-
SAS Address
Specify the SAS address of the SAS host.
The following input conditions apply:
•
Hexadecimal numbers
•
16 characters
→ Return to the [Manual Input] screen.
An error screen appears in the following conditions:
•
•
(3)
Repeat
Step (1)
and
Step (2)
(4)
After adding or deleting SAS hosts is complete, click the [Modify] button.
→ A confirmation screen appears.
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
When the "SAS Address" does not satisfy the input conditions
When the "SAS Address" field has not been specified
to set more SAS addresses.
328
P2X0-1090-02ENZ0