Table of Contents
Advertisement
Chapter 11 System Management
11.2 Functions in the Action Area for System
3
4
11.2.9.7
Register SED Authentication Key
This function registers the authentication key of the Self Encrypting Drive (SED).
SEDs are used to prevent the leakage of the stored data when physically removed disks are sto-
len or lost.
The procedure to register SED authentication key is as follows:
Procedure
1
Click the [OK] button.
→ The SMI-S setting is performed.
Click the [Done] button to return to the [System Settings] screen.
After switching the SMI-S setting between enabled or disabled,
reboot the ETERNUS DX Disk storage system.
•
Register the SED authentication key before installing SEDs in the
ETERNUS DX Disk storage system. If a SED is installed without
registering the SED authentication key, data leakage in a SED that is
removed may occur.
•
If a SED is installed before registering the SED authentication key,
register the SED authentication key and reboot the ETERNUS DX Disk
storage system.
•
The SED authentication key can only be set once in the ETERNUS DX
Disk storage system. The SED authentication key cannot be changed or
deleted after being set.
Click [Register SED Key] in [Action].
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
588
End of procedure
P2X0-1090-02ENZ0
Advertisement
Table of Contents
