Fujitsu Eternus web GUI User Manual page 180

For eternus dx90 s2; eternus dx80 s2; eternus dx410 s2; eternus dx440 s2
Table of Contents

Advertisement

Chapter 8 Advanced Copy Management
8.1 Advanced Copy Status
Source Volume No.
The following is displayed depending on the "Direction". If the status is "Reserve", a "-"
(hyphen) is displayed.
-
-
Destination Volume No.
The following is displayed depending on the "Direction". If the status is "Reserve", a "-"
(hyphen) is displayed.
-
-
Remote Session ID
The session ID for the remote device is displayed.
Type
The copy session type is displayed using an abbreviation (REC).
Status
The copy session status is displayed.
-
-
-
-
-
Phase
The copy session phase is displayed. If the status is "Reserve", a "-" (hyphen) is displayed.
-
-
-
Error Code
The error code is displayed when an error occurs. If the status is "Reserve", a "-" (hyphen) is
displayed.
Direction
The copy direction of the applicable session is displayed. If the status is "Reserve", a "-"
(hyphen) is displayed.
When the "Direction" is "From Local/To Remote"
The copy source volume number is displayed.
When the "Direction" is "From Remote/To Local"
"Remote Box ID/Copy Source Volume No." is displayed.
When the "Direction" is "From Local/To Remote"
"Remote" is displayed.
When the "Direction" is "From Remote/To Local"
The copy destination volume number is displayed.
Active
Operating normally
Reserve
Session ID reserved
Suspend
Suspended by an instruction from the host
Halt
Remote copy disabled due to an error
Error Suspend
Copy canceled due to an error
Copying
Copying
Equivalent
Maintaining equivalent status of the copy source and copy destination that are duplicated
after copy is complete
No Pair
No pair of duplicated copy source and copy destination is set
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
180
P2X0-1090-02ENZ0

Advertisement

Table of Contents
loading

Table of Contents