Table of Contents
Advertisement
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
4
5
9.2.2.7
Modify iSCSI Host Group
This function performs the following modifications to the existing iSCSI host group.
•
Host Group Name
•
Host Response
•
Number of Hosts (Add and delete member hosts in a host group)
An error screen appears in the following conditions:
•
When the "Host Group Name" does not satisfy the input
conditions
•
When the "Host Group Name" has not been specified
Click the [OK] button.
→ Modification of the FC host group starts.
An error screen appears in the following conditions:
•
When the "Host Group Name" overlaps with an existing host
group name (Host group names cannot overlap with any other
host group names, irrespective of the interface types.)
•
When the total number of hosts has exceeded the maximum
number for the device
•
When no hosts are registered in a host group, or when nine or
more hosts are registered in a host group
•
When the specified host has already been registered in another
host group
•
The specified WWN has already been registered in the
ETERNUS DX Disk storage system
•
When the several FC hosts with the same WWNs have been
registered
•
When the specified host response does not exist in the
ETERNUS DX Disk storage system
Click the [Done] button to return to the [Host Group] screen.
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
317
End of procedure
P2X0-1090-02ENZ0
Advertisement
Table of Contents
