Table of Contents
Advertisement
Chapter 7 Thin Provisioning Pool Management
7.2 Functions in the Action Area for Thin Provisioning
5
6
•
To check the number of member drives of the RAID group, click
the [RAID Type] link for the existing RAID group. The drives with
the checkbox selected in the displayed screen are the member of
the RAID group.
•
Click the [RAID Type] link to change the controlling CM and
configuration drives of the RAID group.
•
Click the [Delete] button to delete a RAID group.
When creating multiple RAID groups that configure a TPP, repeat
Step
4.
After creating a RAID group that configures the TPP, click the [Create] button.
→ A confirmation screen appears.
An error screen appears in the following conditions:
•
When a TPP name is not entered
•
When an existing TPP name is entered
•
When the total value of TPP capacity to be created and existing
TPP capacity exceeds the maximum TPP capacity for each
model
The "Attention" threshold can be omitted. When setting the
"Attention" threshold, select the checkbox and then specify a
threshold.
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
152
Step 3
and
P2X0-1090-02ENZ0
Advertisement
Table of Contents
