Table of Contents
Advertisement
Chapter 6 RAID Group Management
6.1 RAID Group Status
-
•
Total Capacity
The total capacity of the RAID group is displayed.
•
ECO Mode Schedule
The ECO mode schedule name that is applied for the RAID group is displayed. When the
ECO mode schedule is not applied, the field is blank.
•
ECO Mode Action
When the ECO mode is enabled, "ON" is displayed. When the ECO mode is disabled, "OFF"
is displayed.
•
Motor Status
The disk motor status for the RAID group is displayed.
-
-
-
-
Filter setting
Name
Status
RAID Type
ECO Mode Schedule
ECO Mode Action
Striping (RAID0)
Active
The disk motors are activated.
In the Boot Process
The disk motors are starting up.
Idle
The disk motors are stopped.
In the Stop Process
The disk motors are being stopped.
Filter
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
Input the RAID group name that is to be displayed.
RAID groups matching or partially matching the input name are
displayed.
When not using the RAID group name for filtering, leave this item
blank.
Select the RAID group status that is to be displayed.
When not using the RAID group status for filtering, select "All".
Select the RAID type that is to be displayed.
When not using the RAID type for filtering, select "All".
Enter the ECO mode schedule name that is applied to the RAID
group that is to be displayed.
RAID groups with ECO mode schedule that matching or partially
matching the input name are displayed.
When not using the ECO mode schedule name for filtering, leave
this item blank.
Select the operating status of the ECO mode that is applied to the
RAID group status that is to be displayed.
When not using the ECO mode action for filtering, select "All".
114
Description
P2X0-1090-02ENZ0
Advertisement
Table of Contents
