Table of Contents
Advertisement
Chapter 11 System Management
11.2 Functions in the Action Area for System
5
6
7
11.2.3.6
Setup SNMP Agent User
This function sets up the user which accesses the SNMP Agent.
The security level and the MIB access range are configured for each user.
Up to ten users can be specified for each ETERNUS DX Disk storage system.
After adding or editing the MIB View, click the [Set] button.
→ A confirmation screen appears.
Click the [OK] button.
→ Setting of the SNMP Agent MIB View starts.
Click the [Done] button to return to the [Network] screen.
•
If the "SNMP Function" is disabled, the [Setup SNMP Agent Manager]
function cannot be used.
•
The user name that is used in the settings in
Agent Trap" (page 477)
The authentication and encryption can be enabled/disabled, and also the
MIB access range can be specified, for each user.
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
cannot be changed or deleted.
471
End of procedure
"11.2.3.8 Setup SNMP
P2X0-1090-02ENZ0
Advertisement
Table of Contents
