Table of Contents
Advertisement
Chapter 11 System Management
11.2 Functions in the Action Area for System
2
3
4
11.2.9.8
Setup Power Management
This function connects the external input device and controls (shuts down) the ETERNUS DX
Disk storage system power.
The procedure to perform power management setting is as follows:
Procedure
1
Click the [Register] button.
→ A confirmation screen appears.
Click the [OK] button.
→ The SED authentication key registration starts.
Click the [Done] button. Return to the [System Settings] screen.
If this function is enabled by mistake, the ETERNUS DX Disk storage
system may shut down unexpectedly. Make sure to check setting contents
before performing settings.
Click [Setup Power Management] in [Action].
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
589
End of procedure
P2X0-1090-02ENZ0
Advertisement
Table of Contents
