Table of Contents
Advertisement
Chapter 5 Volume Management
5.2 Functions in the Action Area for Volume
3
5.2.21
Stop Balancing Thin Provisioning Volume
This function stops TPV balancing.
The procedure to stop balancing of the Thin Provisioning Volume is as follows:
Procedure
1
2
Click the [Done] button to return to the [Balancing Thin Provisioning Volume]
screen.
•
This function cannot be used when balancing is not being performed for
a TPV.
•
This function cannot be used when TPV balancing is already complete.
•
In order to recover normal status (the status before failure), the
configuration information of the ETERNUS DX Disk storage system may
be needed. After balancing TPV is complete (*1), get the configuration
information. Refer to
details.
*1:
This indicates that normal balancing of TPVs has been completed, and
balancing TPV sessions that terminated due to error are deleted
completely.
When TPV balancing is stopped, data in volumes that are not balanced yet
can be accessed normally.
Select the volume for which balancing is to be stopped and click [Stop
Balancing] in [Action].
→ A confirmation screen appears.
Click the [OK] button.
→ TPV balancing stops.
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
"11.2.8.3 Export Configuration" (page 574)
107
End of procedure
for
P2X0-1090-02ENZ0
Advertisement
Table of Contents
