Table of Contents
Advertisement
Chapter 6 RAID Group Management
6.2 Functions in the Action Area for RAID Group
3
6.2.3
Rename RAID Group
This function changes the name of RAID groups that are registered in the ETERNUS DX Disk
storage system.
Multiple RAID groups can be renamed with a single operation.
The procedure to rename RAID group is as follows:
Procedure
1
2
Click the [Done] button to return to the [RAID Group] screen.
Select the RAID group to be renamed (multiple selections can be made) and
click [Rename] in [Action].
Input the new "Name" and the "Start of Suffix", and click the [Rename] button.
•
Name
Specify a new RAID group name.
The following input conditions apply:
-
1 - 16 alphanumeric characters and symbols (except ", (comma)" and "?")
-
Space
•
Start of Suffix
Input the suffix starting number to be added to the new RAID group name. When
changing multiple RAID group names, the suffix number is added to the RAID group
names with consecutive numbers in ascending order starting with the entered suffix
number. Refer to
"C.1 Naming Convention of Volumes" (page 617)
changing only one RAID Group name, "Start of Suffix" is not displayed.
The following input conditions apply:
-
Numeric characters ("0" - "99999")
-
Decimal number
-
1 - 5 digits
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
123
End of procedure
for details. When
P2X0-1090-02ENZ0
Advertisement
Table of Contents
