Chapter 2
This chapter describes how to start, exit, log in, and log out from GUI.
2.1
Startup of GUI
Startup the login screen for GUI.
Connect the PC and the ETERNUS DX Disk storage system using a LAN cable, and display the
login screen via the web browser.
The procedure to start up the login screen for GUI is as follows:
1
2
3
Startup and Shutdown
Procedure
Directly connect the PC and MNT port of the ETERNUS DX Disk storage system
via LAN cable.
Set the IP address and subnet mask for the PC to match the ETERNUS DX Disk
storage system network settings.
Enter "http://IP address of the device/" to the address bar in the web browser
(Default IP address is "192.168.1.1").
→ The login screen for GUI is displayed. Refer to
procedure to login.
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
"2.2 Login" (page 27)
25
for detailed
P2X0-1090-02ENZ0