Table of Contents
Advertisement
Chapter 11 System Management
11.2 Functions in the Action Area for System
The procedure to create a CSR is as follows:
Procedure
1
2
Check the necessary items for authentication beforehand.
Refer to
"11.2.3.17 Register SSL Certificate" (page 497)
procedure to register the SSL server key and SSL server certificate.
Click [Create Key/CSR] in [Action].
Specify the parameters, and click the [Create] button.
•
Key Length
Select the SSL server key length from "1024 bit", "2048 bit", and "4096 bit".
The SSL server key length is equivalent to the encryption level. In general, the longer
the key is, the higher the encryption level becomes (difficult to decrypt the encrypted
data).
•
Country Name
Input the country code which conforms to ISO-3166 A2 (required).
[Example] Japan: JP
The following input conditions apply:
-
Alphabetic characters (upper case) (A - Z)
-
Two fixed letters
•
State or Province Name
Input the prefecture where the organization is located (required).
[Example] Kanagawa
The following input conditions apply:
-
Alphabetic characters (A - Z, a - z)
-
Spaces
-
1 - 63 characters
•
Locality Name
Input the municipality where the organization is located (required).
[Example] Kawasaki
The following input conditions apply:
-
Alphabetic characters (A - Z, a - z)
-
Spaces
-
1 - 63 characters
•
Organization Name
Input the organization name (required).
[Example] XXX LIMITED
The following input conditions apply:
-
Alphabetic characters (A - Z, a - z)
-
Numeric characters (0 - 9)
-
Spaces
-
1 - 63 characters
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
493
for detailed
P2X0-1090-02ENZ0
Advertisement
Table of Contents
