Table of Contents
Advertisement
Chapter 11 System Management
11.2 Functions in the Action Area for System
The procedure to change the SNMP Agent MIB view is as follows:
Procedure
1
2
3
•
If the "SNMP Function" is disabled, the [Setup SNMP Agent Manager]
function cannot be used.
•
The view name that is used in the settings in
Agent User" (page 471)
471)
cannot be changed or deleted.
•
The default view can be changed or deleted.
Click [Setup SNMP MIB View] in [Action].
Click the [Add] button.
Click the [View Name] link to edit the existing MIB View.
Input or edit the MIB View, and click the [OK] button.
•
View Name
Input the MIB View name.
The view name which has already been used cannot be entered.
The following input conditions apply:
-
1 - 32 alphanumeric characters and symbols
-
"! (exclamation mark)", "# (hash mark)", "& (ampersand)", "_ (underscore)", "+
(plus)", "- (hyphen)", "* (asterisk)" and "/ (slash)" can be used
-
Spaces
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
or
"11.2.3.6 Setup SNMP Agent User" (page
469
"11.2.3.6 Setup SNMP
P2X0-1090-02ENZ0
Advertisement
Table of Contents
