Table of Contents
Advertisement
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
The procedure to create an iSCSI port group is as follows:
Procedure
1
2
•
Registration of the port is necessary to create a port group. A port group
cannot be created if the port to be a member has not been registered
from GUI.
•
Only ports with "CA" as the port mode can be added to a port group.
Ports with "RA" as the port mode cannot be added to a port group.
•
A port with the affinity mode enabled (On) and a port with the affinity
mode disabled (Off) cannot exist together in a port group.
-
The affinity mode (On/Off) of a port group is decided when the host
affinity setting has been configured on the corresponding port group.
All of the member ports in a port group have the same affinity mode.
-
The affinity mode (On/Off) of a port group is not changed until the
host affinity setting has been released from the corresponding port
group.
-
When one port is registered in several port groups, and the host
affinity setting has been configured on one of the port groups
including the corresponding port, the same affinity setting is
configured on all the port groups, which include the corresponding
port, and also on the member ports.
-
Ports without the host affinity setting can be members of a port
group, regardless of whether the affinity mode for the group is
enabled (On) or disabled (Off).
•
To change the settings of a port groups, refer to
Group" (page
•
To add a port to an existing port group, refer to
Group" (page
•
To change the port mode from "RA" to "CA", refer to
Port Mode" (page
Click [Create iSCSI Port Group] in [Action].
Specify the name of the port group to be created, select all the ports to be
registered in the port group, and click the [Create] button.
•
Name
Specify the port group name.
An existing port group name cannot be specified.
The following input conditions apply:
-
1 - 16 alphanumeric characters and symbols (except ", (comma)" and "?")
-
Space
•
Checkbox to select a port
Select the checkbox of the iSCSI port to be registered in an iSCSI port group.
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
350).
350).
373).
342
"9.2.3.6 Modify Port
"9.2.3.6 Modify Port
"9.2.3.11 Modify
P2X0-1090-02ENZ0
Advertisement
Table of Contents
