Table of Contents
Advertisement
Chapter 2 Startup and Shutdown
2.1 Startup of GUI
•
When using SSL (https), the "SSL Server Certificate" or the "Self-
signed SSL Certificate" must be registered in the ETERNUS DX
Disk storage system in advance. To obtain the "SSL Server
Certificate", send the CSR (downloaded using the procedure in
"11.2.3.16 Create Key/CSR" (page 492)
authority. Register the obtained "SSL Server Certificate" by using
the procedure in
To obtain the "Self-signed SSL Certificate", use the procedure in
"11.2.3.15 Create Self-signed SSL Certificate" (page 490)
register the created "Self-signed SSL Certificate" in the
ETERNUS DX Disk storage system. Refer to
Installing the Security Certificate" (page 622)
register the "Self-signed SSL Certificate".
•
If Firefox 3.6.x is used for connecting to the ETERNUS DX Disk
storage system via "https", a communication error may occur.
This error can be avoided by connecting via "http" or by using
"Internet Explorer".
•
Refer to
"11.2.3.1 Setup Network Environment" (page 458)
procedure to set the IP address of the MNT port.
•
The default number of port that is used for http connection is "80".
26
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
"11.2.3.17 Register SSL Certificate" (page
to the certification
497).
and
"Appendix D
for details on how to
for
End of procedure
P2X0-1090-02ENZ0
Advertisement
Table of Contents
