Table of Contents
Advertisement
Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
3
4
9.2.5.2
Delete Host Response
This function deletes a host response.
The procedure to delete a host response is as follows:
Procedure
1
An error screen appears in the following conditions:
•
When the "Host Response Name" does not satisfy the input
conditions
•
When the "Host Response Name" has not been entered
Click the [OK] button.
→ Addition of the host response starts.
An error screen appears in the following conditions:
•
When the "Host Response Name" matches with an existing host
response name
•
When the total number of host responses has exceeded the
maximum number of host responses for the ETERNUS DX Disk
storage system
Click the [Done] button to return to the [Host Response] screen.
•
When deleting an active host response, stop the access from the host
group which the host response has been assigned to.
•
If an active host response is deleted, the host response setting will
return to the initial state.
•
The recommended pattern of the host response cannot be changed and
deleted.
Select the host response to be deleted (multiple selections can be made) and
click [Delete Host Response] in [Action].
→ A confirmation screen appears.
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
387
End of procedure
P2X0-1090-02ENZ0
Advertisement
Table of Contents
