Table of Contents
Advertisement
Chapter 9 Connectivity Management
9.1 Connectivity Status
9.1.3.4
FCoE Port
Parameters of the FCoE ports that are registered in the ETERNUS DX Disk storage system are
displayed.
The following items are displayed in the Main area:
•
Port
The location information of the target port is displayed.
-
•
Type
The CA type (fixed at "FCoE") of the target port is displayed.
•
Status
The status of the target port is displayed.
•
Port Mode
The mode (fixed at "CA") of the target port is displayed.
•
Transfer Rate
The transfer speed (fixed at "10 Gbit/s") of the target port is displayed.
•
FC Frame Size
The frame size of the target port is displayed.
"FC Frame Size" specifies the length of the communication information.
-
-
-
•
VLAN ID
The VLAN ID of the target port is displayed.
•
Fabric Name
The fabric name of the target port is displayed.
•
Reset Scope
The reset scope of the target port is displayed.
Reset scope is the range where the command reset request from the server is performed,
when the target port is connected to multiple servers.
CM#x CA#y Port#z (x: CM number, y: CA number, z: Port number)
2048 bytes
1024 bytes
512 bytes
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
276
P2X0-1090-02ENZ0
Advertisement
Table of Contents
