Table of Contents
Advertisement
Chapter 9 Connectivity Management
9.1 Connectivity Status
9.1.3.2
iSCSI Port
Parameters of the iSCSI ports that are registered in the ETERNUS DX Disk storage system are
displayed.
The following items are displayed in the Main area:
•
Port
The location information of the target port is displayed.
-
•
Type
The type of the target port is displayed.
-
-
-
•
Status
The status of the target port is displayed.
•
Port Mode
The mode of the target port is displayed.
-
-
•
Transfer Rate
The transfer speed of the target port is displayed. All transfers are full-duplex.
-
-
-
-
CM#x CA#y Port#z (x: CM number, y: CA number, z: Port number)
1G iSCSI
1Gbit/s iSCSI. The port mode can be changed (CA or RA).
10G iSCSI
10Gbit/s iSCSI. The port mode can be changed (CA or RA).
iSCSI-RA (for the connection of older devices)
1Gbit/s iSCSI-RA. It is used for REC for the ETERNUS DX400 series, the ETERNUS
DX8000 series, the ETERNUS4000, and the ETERNUS8000.
CA
RA
Auto-negotiation
1 Gbit/s
10 Gbit/s
100 Mbit/s
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
273
P2X0-1090-02ENZ0
Advertisement
Table of Contents
