Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
The procedure to create an FC port group is as follows:
Procedure
1
2
•
To change the settings of a port groups, refer to
Group" (page
•
To add a port to an existing port group, refer to
Group" (page
•
To change the port mode from "RA" to "CA", refer to
Port Mode" (page
Click [Create FC Port Group] in [Action].
Specify the name of the port group to be created, select all the ports to be
registered in the port group, and click the [Create] button.
•
Name
Specify the port group name.
An existing port group name cannot be specified.
The following input conditions apply:
-
1 - 16 alphanumeric characters and symbols (except ", (comma)" and "?")
-
Space
•
Checkbox to select a port
Select the checkbox of the FC port to be registered in a FC port group.
•
•
•
→ A confirmation screen appears.
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
350).
350).
373).
When a port that has the affinity mode enabled (On) is
selected, ports that have the affinity mode disabled (Off)
cannot be selected.
When a port that has the affinity mode disabled (Off) is
selected, ports that have the affinity mode enabled (On)
cannot be selected.
Up to eight ports can be selected.
340
"9.2.3.6 Modify Port
"9.2.3.6 Modify Port
"9.2.3.11 Modify
P2X0-1090-02ENZ0