Table of Contents
Advertisement
Chapter 8 Advanced Copy Management
8.2 Functions in the Action Area for Advanced Copy
■ When a device for which port setting is not completed exists
■ When port setting is completed for all the selected devices
•
Alias Name
Specify the alias name of the iSCSI port (can be omitted). If not specified, the field is
blank.
The following input condition applies:
-
1 - 31 alphanumeric characters
•
User Name
Specify the user name to access the iSCSI port (can be omitted). After specifying the
user name, specify the "Password". If not specified, the field is blank.
The following input condition applies:
-
1 - 255 alphanumeric characters and symbols
•
Password
Specify the password to access the iSCSI port (can be omitted). This item is required
when setting the "User Name". The entry is displayed with "*" or similar characters. If
not specified, the field is blank.
The following input condition applies:
-
12 - 100 alphanumeric characters and symbols
The displayed screen is different depending on the port setting status.
→ The [Device Configuration Setting] screen appears again. Proceed to
→ The [Device Information File Selection] screen appears. Proceed to
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
225
Step
5.
Step
7.
P2X0-1090-02ENZ0
Advertisement
Table of Contents
