Table of Contents
Advertisement
Chapter 8 Advanced Copy Management
8.2 Functions in the Action Area for Advanced Copy
The procedure to modify REC multiplicity is as follows:
Procedure
1
2
3
Select the target remote device to change multiplicity (multiple selections can be
made), and click the [Modify REC Multiplicity] in [Action].
A remote device with "Direct" as the connection type cannot be
selected.
Specify the multiplicity, and click the [Set] button.
•
Specification Mode
Select the specification mode for multiplicity. When the "Connection Type" is "Direct", a
"-" (hyphen) is displayed.
-
Auto
-
Manual
•
Multiplicity
If "Manual" is selected for the specification mode, specify the multiplicity between 1 -
1024. When the "Connection Type" is "Direct", a "-" (hyphen) is displayed.
→ A confirmation screen appears.
Click the [OK] button.
→ The specified REC multiplicity is updated in the device.
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
247
P2X0-1090-02ENZ0
Advertisement
Table of Contents
