Table of Contents
Advertisement
Chapter 11 System Management
11.2 Functions in the Action Area for System
11.2.5.3
Modify RADIUS
This function specifies the external server (RADIUS server) that is used for authentication when
logging in.
Up to two RADIUS Authentication servers can be registered.
The procedure to modify RADIUS is as follows:
Procedure
1
2
•
Enable or disable RADIUS Authentication for each device.
•
If
RADIUS
Authentication" has been selected for "Authentication Error Recovery",
logging on to GUI will not be available.
•
RADIUS Authentication cannot be used when logging in to the Slave
CM.
•
When "Use Internal Authentication (Network Error Case)" has been
selected for "Authentication Error Recovery", Internal Authentication (*1)
is performed if authentication fails in both the primary and the secondary
servers due to a network error in either or both of the servers.
*1:
This is the standard authentication type. Internal Authentication uses user
account information stored in the device to verify the input user account.
•
When using RADIUS Authentication, registering user account
information (user name, password, and role) in RADIUS server is
required. For details, refer to the manuals provided with the server.
•
Even if the RADIUS Authentication function has been changed to
"Disable", RADIUS Authentication information in the ETERNUS DX Disk
storage system is maintained.
Click [Modify RADIUS] in [Action].
Specify the parameters, and click the [Set] button.
●
RADIUS Setting
•
RADIUS Authentication
Select whether to "Enable" or "Disable" RADIUS Authentication.
-
Enable
Use RADIUS Authentication.
-
Disable
Use Internal Authentication.
•
Recovery Mode
When "Enable" has been specified in the "RADIUS Authentication" field, select the
desired operation if RADIUS Authentication fails.
If RADIUS Authentication fails when "Do not use Internal Authentication" has been
selected for "Authentication Error Recovery", logging on to GUI will not be available.
Selecting "Use Internal Authentication" is recommended.
ETERNUS Web GUI User's Guide
Copyright 2011 FUJITSU LIMITED
Authentication
fails
532
when
"Do
not
use
P2X0-1090-02ENZ0
Internal
Advertisement
Table of Contents
